Comtech EF Data CMR-5995, Инструкция по установке и эксплуатации

Страница: 51 / 136

Digicast Media Router S2 Receiver CMR-5995 (MR-S2-ASI) Revision 1
Device Management via User Interfaces MN-CMR5995-IOM
4-17
4.2.11 MPE/IP Configuration
A configured PID value, in hexadecimal, is required for MPE/IP data to be extracted from the
transport stream and sent to the CPU. Once a valid PID value is configured, and data is found on
a transport stream, the data is decapsulated and delivered to the Ethernet port.
From the pull-down list, select an input interface for which the PIDs will be configured for
MPE/IP (Tuner or ASI). A value of 0x1FFF is shown if disabled.
Name
User defined name (cannot contain spaces)
PID
A valid PID in hexadecimal format, ranging from 0x10 to 0x1FFE (0x1FFF disables the entry).
The PID value cannot be in use elsewhere on the receiver.