Comtech EF Data CLNA, Инструкция по установке и эксплуатации

Страница: 10 / 22

LNA Low Noise Amplifier Series Revision 0
Preface MN/LNAS.IOM
viii
EMC (Electromagnetic Compatibility)
In accordance with European Directive 89/336/EEC, the LNA Modem has been shown, by
independent testing, to comply with the following standards:
Emissions:
EN 55022 Class B - Limits and methods of measurement of radio interference
characteristics of Information Technology Equipment.
(Also tested to FCC Part 15 Class B)
Immunity:
EN 50082 Part 1 - Generic immunity standard, Part 1: Domestic, commercial and
light industrial environment.
Additionally, the LNA has been shown to comply with the following standards:
EN 61000-3-2 Harmonic Currents Emission
EN 61000-3-3 Voltage Fluctuations and Flicker
EN 61000-4-2 ESD Immunity
EN 61000-4-4 EFT Burst Immunity
EN 61000-4-5 Surge Immunity
EN 61000-4-6 RF Conducted Immunity
EN 61000-4-8 Power Frequency Magnetic Field Immunity
EN 61000-4-9 Pulse Magnetic Field Immunity
EN 61000-4-11 Voltage Dips, Interruptions, and Variations Immunity
EN 61000-4-13 Immunity to Harmonics
In order that the Modem continues to comply with these
standards, observe the following instructions:
•
Connections to the Tx and Rx IF ports (Type N or Type F connectors) should be
made using a good quality coaxial cable - for example 50
Ω
or 75
Ω
.
•
All 'D' type connectors attached to the rear panel must have back-shells that provide
continuous metallic shielding. Cable with a continuous outer shield (either foil or
braid, or both) must be used, and the shield must be bonded to the backshell.
•
The equipment must be operated with its cover on at all times. If it becomes
necessary to remove the cover, the user should ensure that the cover is correctly re-
fitted before normal operation commences.
IMPORTANT