Comtech EF Data CDM-840, Инструкция по установке и эксплуатации, Страница: 55 / 110

CDM-840 Remote Router Revision 0
Ethernet Management MN-CDM840
5–9
5.4.4.3.2 Admin | SNMP
Figure 5-4. Admin | SNMP page
The ‘ Admin | SNMP’ page ( Figure 5-4 ) sets and returns administration information for the
CDM-840 Simple Network Management Protocol (SNMP) feature. For further information about
SNMP, see
Section 5.3 SNMP INTERFACE .
SNMP Configuration
Note that the SNMP Trap Destination IP Address feature is a FUTURE offering at this time
and is therefore non-functional in this section. Otherwise, use the provided text boxes to assign
the desired SNMP configuration string. Note the following:
•
An SNMP Read Community String can be assigned. This string can be any combination of
characters and a length of 4 - 15 characters. The factory default for this parameter is public .
•
An SNMP Write Community String . This string can be any combination of characters and
a length of 4 - 15 characters. The factory default for this parameter is private .
For each string created, click [ Submit] as needed to save the change(s).