Comtech EF Data CDM-600L, Инструкция по установке и эксплуатации

Страница: 79 / 206

CDM-600L Satellite Modem Revision 0
Front Panel Operation MN/CDM600L.IOM
6–33
6.3.4 MONITOR
Select the parameter to Monitor using the [
←
][
→
]
arrow keys, then press ENTER.
6.3.4.1 MONITOR: LIVE-ALARMS
An example of an Alarm screen is shown. The
highest priority alarm currently active for
each of the four alarm types is shown:
•
Unit
•
TX
•
RX
•
Open Network
6.3.4.2 MONITOR: STORED EVENTS
An example of a Stored Events screen is shown. Use the [
↑
] [
↓
] arrow keys to select
Clear All: YES or NO,
then press ENTER.
Use the [
←
][
→
] arrow keys to select the ‘#’ character on the bottom line to view the log
entries. Scroll backwards or forwards through the entries in the event log, using the [
↑
]
[
↓
] arrow keys. Pressing ENTER or CLEAR will take the user back to the previous
menu. The event log can store up to 199 events. When a fault condition occurs, it is time-
stamped and put into the log. Similarly, when the fault condition clears, this is also
recorded.
If the user selects CLEAR ALL, the event log is cleared, and the user is taken directly
back to the previous menu. However, if there are faults present on the unit at this time,
they will be re-time-stamped, and new log entries will be generated.
Note that in accordance with international convention, the date is shown in DAY-
MONTH-YEAR format.
MONITOR: LIVE-ALARMS STORED-EVENTS
STATISTICS RX-PARAMS AUPC-PARAM LNB BUC
LIVE UNIT= NONE NET= NONE
ALARMS RECV=DEMOD LOCK XMT= NONE
STORED EVENTS: CLEAR ALL: YES (NO,YES)
#199 FT-FRAME SYNC 23/07/01 16:25:24