Comtech EF Data 570AL, Руководство по пересмотру

Страница: 9 / 12

Re ‐ Flashing Your CDM ‐ 570A/570AL Satellite Modem 9 FLG ‐ CDM570A Revision 1
IV. Perform the Ethernet FTP Upload Procedure
1) You may proceed with the firmware update procedure under the assumptions that:

Your CDM ‐ 570A/L is connected to a user ‐ supplied, Windows ‐ based PC, and:
o
Your PC serial port is connected to the CDM ‐ 570A/L “Remote Control” port
with a standard user serial cable.
o
Your PC Ethernet port is connected to the CDM ‐ 570A/L IP Packet Processor
“Traffic 100” Ethernet port with a user ‐ supplied hub, switch, or direct Ethernet
cable connection.
o
Your PC is running a terminal emulation program (for operation of the CDM ‐
570A/L ’ s Serial Interface) and a compatible Web browser (for operation of the
CDM ‐ 570A HTTP Interface).

Your CDM ‐ 570A/L firmware and Ethernet Traffic/Management IP Address has been
noted using either the CDM ‐ 570A/L ’ s Serial Interface or the CDM ‐ 570A HTTP
Interface ‘ Admin | Firmware | Base Modem ’ / ‘ Admin | Firmware | Packet
Processor ’ and ‘ Configuration | LAN ’ pages, respectively.

The latest firmware files have been downloaded or otherwise received from
Comtech EF Data and are available on the User PC in an accessible temporary
folder.
2) Modem redundancy features must be disabled prior to update.
3) When updating firmware on modems equipped with the IP Packet Processor, you
must upload both the Base Modem and IP Packet Processor firmware files, and select
the firmware slots prior to rebooting the modem.
Before you can transfer the firmware files from the User PC to the CDM ‐ 570A/L, you must first use
Command ‐ line to “ping” the modem to confirm proper connection and communication between the
User PC and the modem:

Type “ ping xxx.xxx.xxx.xxx ” at the Command ‐ line prompt (where ‘xxx.xxx.xxx.xxx’ is the unit
Ethernet Traffic/Management IP Address). The response should confirm whether the unit is properly
connected and communicating.
You may proceed once you have verified User PC ‐ to ‐ Modem communications.
1) Use Command ‐ line to transfer (FTP) the files from the User PC to the CDM ‐ 570A/L:
A. Type " ftp xxx.xxx.xxx.xxx " (where ‘ xxx.xxx.xxx.xxx ’ is the CDM ‐ 570A/L Ethernet
Traffic/Management IP Address).
B. The Admin User Name and Password when prompted. The default User Name and Password is
“ comtech ”.