Comtech EF Data 570AL, Руководство по пересмотру

Страница: 3 / 12

Re ‐ Flashing Your CDM ‐ 570A/570AL Satellite Modem 3 FLG ‐ CDM570A Revision 1

Chapter 6. FRONT PANEL OPERATION

Chapter 7.5 HTTP (Web Server) INTERFACE

Chapter 8. SERIAL ‐ BASED REMOTE PRODUCT MANAGEMENT
Using the CDM ‐ 570A/L Front Panel menus:

Base Modem Firmware Info – Use the SELECT: UTIL

Firmware

Info

Image#1 or
Image#2

Bulk menu branches, as shown in this example:
Bulk#1: MM/DD/YY
FW-0020683* #.#.#

IP Packet Processor Firmware Info – Use the SELECT: UTIL

Firmware

Info

PaP
menu branches, as shown in this example:
PaP: MM/DD/YY
FW-0020781* #.#.#

Ethernet IP Address – Use the CONFIG: Rem

Ethernet

Address menu branch, as
shown in this example:
Ether IP Address/Range:
192.168.001.011/24
◄ ► , ▲▼
Using the CDM ‐ 570A HTTP Interface (via the User PC Web Browser – this assumes that you
have already noted the Traffic/Management IP Address, which was previously required to
open the CDM ‐ 570A HTTP Interface):

Base Modem Firmware Info – Use the ‘ Admin | Firmware | Modem ’ page, as shown in this
example:

IP Packet Processor Firmware Info – Use the ‘ Admin | Firmware | Packet Processor ’ page,
as shown in this example: