Wireless ADSL Modem User’s Manual 33
PPP Configuration
The current release supports multiple PPP sessions per PVC. The PPP configuration in
the WAN configuration page is for the first PPP session for each of PVC. The predefined
PPP Account Name (Account ID) is “Simple PPP Account 0” for PVC0 and predefined
PPP Connection Name is “Simple PPP Session 0” for PVC0. For the other PVC X, the
predefined account name and connection name will be Simple PPP Account X and
Simple PPP Session X. X is the PVC number from 1 to 7.
It can support up to total of 16 PPP sessions, and each of PVC can support up to 8 PPP
sessions. The multiple PPP sessions may be configured with any combination over 8
PVCs.
•
Service Name: The service name of PPP is required by some ISPs. If the ISP does
not provide the Service Name, please leave it blank.
•
User Name: Enter the PPP user name (usually provided by the ISP).
Note: You cannot have two different user accounts with the same account name. If a different User
Name with an already existing Account ID is submitted, it will replace the previous account with
that Account ID. You can have the same User Name and Password for two different accounts
(Account ID).
•
Password: Enter the PPP password (usually provided by the ISP).
•
Disconnect Timeout: The Disconnect Timeout allows users to set the specific
period of time to disconnect from the ISP. The default is 0, which means never
disconnect from the ISP.
Please refer to following session for more detailed information about PPP configuration.
