COMSOL flashIT2, Руководство пользователя

Страница: 8 / 11

USB 2.0 flashIT2 Flash Drive User’s Manual 7
5.7 BootUp Feature – Only for Windows 98SE
The BootUp options only appear if the Comsol flashIT2 Flash Drive and utility program
is installed on Windows 98SE Operating system.
The interface will appear as below with the boot-up options
5.6.3. Select the “Bootable Disk” option on the “Partition” tab and select
bootup type - USB-ZIP or USB-HDD.
5.6.4. Click
“
Partition
” ，
the disk will be formatted, and all bootup program
files are copied to the root of the removable disk. After formatting, the
Comsol flashIT2 Flash Drive becomes a bootable disk that will
bootup the DOS system in USB-ZIP or USB-HDD mode.
Note: When the disk is made as USB-HDD bootable disk, it does not support partition
function.
5.8 Using the bootable disk under DOS
To operate the Comsol flashIT2 Flash Drive under DOS, the BIOS of your
motherboard MUST support USB-ZIP or USB-HDD bootup.
Plug the bootable disk into the USB port of the computer. Set “First Boot Device” of
the BIOS as “USB-ZIP” or “USB-HDD”, then the Comsol flashIT2 Flash Drive can be
used to bootup DOS. When booting to DOS, you can use the Comsol flashIT2 Flash
Drive under DOS.
Note:
•
If the bootup mode is USB-ZIP, when the system boots to DOS, the Comsol
flashIT2 Flash Drive is “Drive A”; If the bootup mode is USB-HDD, it is “Drive
C”.
•
We cannot guarantee that all kinds of motherboard will boot successfully due
to different BIOS designs.