COMSOL flashIT2, Руководство пользователя

Страница: 4 / 11

USB 2.0 flashIT2 Flash Drive User’s Manual 3
4. Driver Installation
4.1 Windows ® 98SE Driver Installation
4.1.1 Insert your USB 2.0 flashIT2 Flash Drive driver CD, find the folder
named “utility software”, then double click “Setup.exe”. Follow the
instructions on the screen to install the driver automatically.
4.1.2 Plug USB 2.0 flashIT2 Flash Drive into the USB port, the system will
install the hardware automatically. Open “My Computer”, a new icon
using the next available drive letter labeled “Removable Disk” will
appear in “My Computer”.
4.2 Windows ® ME/2000/XP Driver Installation
4.2.1 Just insert USB 2.0 flashIT2 Flash Drive into USB port, system will
install USB 2.0 flashIT2 Flash Drive automatically. After that you can find
a new icon using the next available drive letter labeled “ Removable
Disk” in “ My Computer”, then you can operate USB 2.0 flashIT2 Flash
Drive just as your local hard disk.
4.3 Linux Driver Installation
4.3.1 You can utilize command “Mount” to mount this device.
4.3.2 Insert USB 2.0 flashIT2 Flash Drive into USB port first.
4.3.3 Execute “cd /etc/sysconfig/ (cat /etc/sysconfig/hwconf / more)”.
4.3.4 Check the device information in “hwconf” and write down the mount
point.
4.3.5 Make a new directory in “/mnt (ex: mkdir/mnt/usbHD)”. Then carry out
“mount /dev/sda1 /mnt/usbHD (if mount point was dev/sda)”.