COMSOL BT-01-R, Руководство пользователя

Страница: 4 / 7

3
3. Pairing with Bluetooth devices
Function Operation
LED
indicator Indication
tone
Enter
pairing
mode Ensure the receiver is turned
off. Press and hold MFB
button for 7
～
8 seconds until
the LED flashes Red and
Blue
LED
flashes
Red and
Blue Two tones
Remark:
The pairing mode will last 2 minutes. The receiver will switch to
standby mode automatically if no devices can be connected within 2
minutes.
Pairing with Bluetooth Phone or Tablet
Ensure your phone or tablet supports A2DP profile. The pairing procedures
will vary depending on different models of phones and tablets. Please refer
to your
device’s user manual for detailed instruction. The general pairing
procedure is as follows:

Place the receiver and Bluetooth device within 1 metre of each other.

Enter the receiver
’s pairing mode by pressing and holding the MFB
button for 7~8 seconds.

Activate your device
’s Bluetooth function and set your device to search
for Bluetooth devices within range.

S
elect “Comsol BT-01-R” from the list of devices shown.

If your device’s Bluetooth version is 2.1 or higher, the receiver will
automatically pair with your device.

If your device’s Bluetooth version is less than 2.1 you will be prompted
to enter a password or PIN No: Enter
“0000”

If prompted by your device
to connect, select “Yes”

After successful connection, the LED will flash Blue twice quickly every
5 seconds.
Remarks:

If no devices can be connected within 5 minutes, the receiver will turn off
automatically in order to save power.