Comset CM770W-6, Руководство пользователя

Страница: 12 / 98

CM770W-6 User Manual
12
www.comset.com.au
.
Attention:
1. If you are not using the AC adapter supplied with the router, and if you wish to power
up the unit using the terminal block, the power cable should be wired with the correct
voltage polarity. Wrong wiring will destroy the equipment. Pin 1 and Pin 2 are reserved
for power, where Pin 2 is “GND” and PIN 1 is power input “Vin”(DC5~40V).
PIN Signal Description Note
1 VCC
+5-40V DC Input
(+5~60V optional) Current: 12V/1A
2 GND Ground
3 GND Serial Ground
4 RX Receive Data
5 TX Transmit Data
6 RST Reset
The Reset Pin has the same
function as the reset button.
Simply short the RST pin with
the GND Pin and hold for 3 sec
and the device will restore to
factory settings. If you hold for
1 sec, the router will reboot.
7 DIO3
General Purpose
I/O
8 DIO2
General Purpose
I/O
9 DIO1
General Purpose
I/O
10 DIO0
General Purpose
I/O