Safety and Warranty
•
Please read these safety instructions carefully.
•
Please disconnect this equipment from any AC outlet before cleaning.
•
Do not use liquid or spray detergents for cleaning the screen or case, use a damp cloth to clean case.
The display area is highly prone to scratching. Do not use ketene type material (ex. Acetone), Ethyl
alcohol, toluene, ethyl acid or Methyl chloride to clear the panel. It might permanently damage the
panel. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. If still
not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft,
lint-free cloth, and wipe the screen.
o
We do not recommend the use of any ammonia or alcohol-based cleaners on the monitor screen
or case. Some chemical cleaners have been reported to damage the screen and/or case of the
rack LCD monitor. Seller will not be liable for damage resulting from use of any ammonia or
alcohol-based cleaner.
•
For pluggable equipment, the power outlet must be installed near the equipment and must be easily
accessible.
•
Keep this equipment away from humidity.
•
Put this equipment on a reliable surface during installation. Dropping it or letting it fall could cause
damage.
•
The openings on the enclosure are for air convection. Protect the equipment from overheating. DO
NOT COVER THE OPENINGS.
•
Make sure the voltage of the power source is correct before connecting the equipment to the power
outlet.
•
Position the power cord so that people cannot step on it. Do not place anything over the power cord.
•
All cautions and warnings on the equipment should be noted.
•
If the equipment is not used for a long time, disconnect it from the power source to avoid damage by
transient over-voltage.
•
Never pour any liquid into an opening. This could cause fire or electrical shock.
•
Never open the equipment. For safety reasons, only qualified service personnel should open the
equipment.
•
If any of the following situations arises, get the equipment checked by service personnel:
o
The power cord or plug is damaged.
o
Liquid has penetrated into the equipment.
o
The equipment has been exposed to moisture.
o
The equipment does not work well, or you cannot get it to work according to the user’s manual.
o
The equipment has been dropped and damaged.
o
The equipment has obvious signs of breakage.
•
Do not leave this equipment in an uncontrolled environment where the storage temperature is below
-20° C (-4° F) or above 60° C (140° F), as this may damage the equipment.
Nd-WNxx-KB 1U Rack LCD Drawer Hardware User Guide
This document contains Confidential/Proprietary Information belonging to Computer Dynamics
1-4
