Statox 503 Control Module
Issue 10 / 2018 Page
7
of
46
You can combine modules of the Statox 503 series in any sequence. Adding or removing one module has no
impact on the others. You can save wiring effort starting with the power supply on the outside and connecting
it to the bus with the bus plug. Alternatively the first module in a row can be connected to 24 ± 2 VDC, the
others will be supplied via bus. The power rail is rated for 30 modules max. in one row. You can interconnect
multiple rows with the optional bus plugs (Connection set Art.# 557003, 1 set per rail is needed). For further
information see Accessories list
chapter 12
.
A combination of Statox 502 and Statox 503 Control Modules on one DIN Rail is possible.
Please observe the different assignment of terminal 11.
Dismounting
Pull the spring lock with a screw driver and incline the module simultaneously, see
Figure 3
. This can be done
under operating conditions.
1
2
Figure 3: Dismounting from DIN rail
Figure 2: Mounting to DIN rail
!
