Printer Maintenance and Troubleshooting
A78408098-005
70
Error Message Description
Messages
Indication
Solution
A.G.A. NOT OPER.
ADJUST THE GAP
The automatic gap adjustment
(A.G.A) is not enabled.
Press the
ON LINE
key to reset the error
condition. Adjust the print head gap to a
fixed distance. Select the print head gap
adjustment in the Program Menu.
•
Press the
PROGRAM
key when the
printer is disabled (
READY
indicator
unlit) to enter the Program Setup.
•
Press the
↓
key until the
USER MACRO
function is displayed. Press the
→
key
until the desired macro is displayed
(
MACRO#
x
).
•
Press the
→
key to enter the macro
parameters.
•
Press the
↓
key until the
FIXED GAP
parameter is displayed.
•
Press the
→
o
←
keys to select the
fixed gap adjustment values. From
FIXED
GAP
1
(simple fanfold) to
FIXED GAP 4
(multipart fanfold).
BUFFER OVERFLOW
CHARACTER LOST
An overflow condition occurs
in the buffer (if the serial
interface is selected).
Turn the printer off and on again, or press
the
PROGRAM
and
ON LINE
key
successively and the buffer will be cleared.
DATA SET OFF
The DSR Signal is not
connected to the printer and is
not ready for data transfer (if
the serial interface is
selected). This condition may
happen in a remote connection
(via modem) and the DSR
(DATA SET
READY
) signal is
missing.
Press the
ONLINE
key to reset the error
condition.
INTERLOCK ERROR
CHECK INSERTION
Neither the rear tractor nor
the tractor cover are installed
on the printer.
Install the rear tractor or the tractor cover
on the printer.
NOPATH AVAILABLE
An electromechanical failure
occurs in the lower or upper
tractor paper paths.
Call Service.
NO PATH AVAILABLE
PATH CHANGING
An electromechanical failure
occurs in the lower tractor
paper path. The printer
changes automatically to the
cut sheet paths (Manual or
ASF).
Call Service.
Содержание 9058
Страница 1: ...9 90 05 58 8 9 90 05 58 8D D U Us se er r M Ma an nu ua al l Rev 001...
Страница 2: ......
Страница 8: ...Table of Contents A78408098 005 vi...
