6
machine has been disconnected from the supply network and starting-up
mechanisms are blocked.
•
Before working on the machine it is advisable to follow the steps below:
1. Cut the machine voltage.
2. Block the starting-up mechanisms.
3. Check that there is no voltage in the circuits, including the auxiliaries and
supplementary services.
4. Wait until the wheel has stopped completely.
The mentioned list should be considered indicative and not binding, since there may be
specific safety rules within specific safety procedures.
•
Periodically control:
-
The mechanical parts are firmly secured and the machine support screws are
in good condition.
-
Correct positioning and fixing and the condition of the leading-in wires and
isolation components.
-
Machine and electric motor temperature. In case of irregularity, stop the
machine immediately and proceed with its repair.
-
Machine shake. In case of irregularity, stop the machine immediately and
