22
The Internet Setting
The IP camera connection could follow the method below:
1.
If user’s PC is support Universal Plug and Play (UPnP™) service and
network setting is in DHCP, the Compro IP50 / 50W will auto
detected and add it into the My Network place. (If user could see
the Compro IP 50 / 50W already, please switch to next page)
Note:
If user wants to install the UPnP™ service, please execute
the “Add/Remove” program in “Control Panel”. After the dialog
opened, please select “Add/Remove Windows Components” and
select the “Networking Services” selection. User will see the
“Detail” button, please press it and try to find the “UPnP” selection.
Please select it and add it into user’s operation system.
2.
If user uses the router, user should easy to see the IP address had
been assigned for the Compro IP50 / 50W in the router’s
administration pages. If user gets any problem, please refer the
router’s documentation.
3. If user uses DHCP to connect to internet, then user needs to apply
for a DDNS (Dynamic DNS), user could apply to a new hostname
from Compro’s free iDDNS service or refer to the DynDNS or no-ip
website and apply for a new one. After user gets the DDNS, please
enter the IP address to login the IP Camera. After login the IP
Camera, please go for -> Setup ->Network ->DDNS and enter the
entire DDNS column.