21
The recorded file from VCR has no sound?
Please plug VCR Composite video cable (yellow) into TV Box yellow connector.
Composite
Audio
needs to connect to the
Line-In port of your sound Box. You have to
buy a converter (see the right) to transfer
Composite Audio cable (red one and white
one) into stereo. Choose Line-In to be your
Recording Mixer in the Device System in
Settings of ComrpoDTV.
How can I record as a different video format?
Digital program is a fixed MPEG-II format file already. ComproDTV can’t
change it and will save it into hard disk directly. Only analog video from
composite or s-video input connect can be software encode to your choice of
video format. You can do that in the record tab in settings of ComproDTV 2.
Why does the remote control fail?
The remote control sensor, which is plugged into the TV Box, may be loose.
Please unplug it and plug it in again. You should also check the batteries of the
remote control. Do not use rechargeable batteries.
Verify that the
IR icon (ComproRemote) is in the system tray on the
lower-right corner of the screen. If you don't have ComproRemote on the
system tray, start the following program:
C:\Program Files\ Common Files\VideoMate\ComproRemoteDTV.exe
Then you should see the icon on the system tray. The IR icon should turn
bright when you press buttons on the remote.
If you see no response, please move your mouse cursor on the IR icon. If you
see it shows “No Device,” your drivers may not be not properly installed.
Please remove ComproDTV using "Add/Remove programs" in the Control
Panel and reinstall it.
Some devices may emit the IR signals. Please check if there are any
microwaves or lights that may be doing this. And make sure as few cables as
possible are crossing the IR receiver.
