3
Installation
Start the computer. After plugging in the USB cable, Windows will start the
Found New Hardware Wizard. Please press
Cancel
.
Step 1. Insert the installation CD into your CD drive. If you have Autorun
enabled, the installer will start automatically. (If Autorun is not enabled,
double-click on “setup.exe” on the installation CD.)
Step 2. Choose
Complete
to install all necessary software (VideoMate
DVB-U2200 drivers, ComproDTV 2.5, ComproDVD 2, Ulead
PhotoExplore 8.5 SE).
Step 3. Follow the directions to install the drivers and software.
Step 4. If you see the Windows Logo testing message, you should ignore it
and press
Continue Anyway
to proceed. (See image on the
following.)
Step 5. After completing the installation, plug in the TV signal cable in the
VideoMate DVB-U2200 TV-In connector.
Step 6. Start ComproDTV 2.5 and scan channels as prompt.
Step 7. Enjoy the show.
Note
In order to decode DVB-T MPEG-2 file format, you have to install the Ulead
PhotoExplore 8.5 SE on the installation CD for decoding.
