Comprag A7513, Инструкция по эксплуатации

Страница: 25 / 96

+7 (800) 777-83-75(звонок бесплатный)
www.v-p-k.ru A7513
5. Maintenance
5.1 Maintenance schedule
Maintenance schedule
Daily Monthly Yearly
Interval in work hours
M-1 M-2 M-3 M-2
500 2000 4000 6000
Oil level Check/
Refill
Compressor oil Replace Replace Replace Replace
Air filter Cleaning Replace Replace Replace
Oil filter Replace Replace Replace Replace
Ait-Oil Separator Replace
Drive belt Check Replace
Heat exchanger Cleaning
Bearings of electric
motor
Lubricate
Intake valve Check
Minimum pressure
valve
Check
Safety valve Check
Beyond 6000 working hours, compressor maintenance consists in alternating M-2 and M-3
every 2000 hours of running time. Performance of daily, weekly, monthly and annual servic-
ing does not annul the need for maintenance in terms of operating hours.
5.2 Checking oil level
Check oil level on a daily basis. In order to access the oil level, stop the compressor and remove the
front side panel. The oil level in the compressor should be checked visually with the oil level glass (1)
when the compressor has stopped. The surface of the oil must always be visible in the sight glass
If no oil is visible in the sight glass, the oil level is low and needs to be topped up. Using belt tension
gauge, check the tensile force of the compressor belts.