Comprag 11100061, Руководство пользователя

Страница: 22 / 88

+7 (800) 777-83-75(звонок бесплатный)
www.v-p-k.ru A3008
1. Immediate Stop Shutdown Errors
1.1 Digital input errors
Er:0010 E Emergency stop / phase failure relay
Er:0080 E Main motor fault / ventilator motor fault
1.2 Analogue input errors
Er:0115 E Delivery pressure sensor fault
Er:0119 E Delivery pressure high
Er:0125 E Delivery temperature sensor fault
Er:0129 E Delivery temperature high
1.3 Special function errors
Er:0821 E Low resistance, short circuit or short circuit to earth condition exists on an
analogue input or digital input (incorrect connection, cable fault or sensor fault)
Er:0846 E Delivery pressure sensor range is set too low for default pressure settings
to be applied
2. Controlled Stop Shutdown Errors
None
3. Alarms
3.1 Digital input alarms
3.2 Analogue input alarms
Er:2118 A Delivery pressure high
Er:2128 A Delivery temperature high
3.3 Special function alarms
Er:2816 A Power failure occurred while compressor was in the Started state
4. Start Inhibits
none
5. Run Inhibits
Er:3123 R Delivery temperature Td below the set low temperature run inhibit level,
controller will allow motor start when temperature increases above the set level
6. Service Alarms
6.1 Special function service alarms
Er:4804 A Service hours time expired, service due (reset service hours countdown
timer)
22