Compliance West MegaPulse 2x10s-2.5, Инструкция по эксплуатации

Страница: 9 / 32

5
Section 2
Introduction and Specifications
Introduction
This manual contains complete operating,
maintenance and calibration instructions for the
Compliance West USA MegaPulse series
Impulse Tester.
•
In case of trouble, the test can be
immediately terminated at any time by
turning the rear-panel power switch to the
OFF position.
•
Before the test can commence, the unit
must be armed by pressing the CHARGE
Button. The test will not begin until the
TRIGGER Button is pushed.
•
Operator instructions are printed on the
rear panel for quick reference.
•
Voltage is discharged by a resistor bank
within the MegaPulse tester upon test
completion. Discharge progress is shown
on the front panel meter.
Your Tester is warranted for a period of one year
upon shipment of the instrument to the original
purchaser.
Figure 1.
Specifications
Specifications for each individual model in the
MegaPulse series are listed in Table 1.
Component designations referenced in Table 1
are as shown in Figure 1.