Compliance West HTT-1S, Инструкция по эксплуатации

Страница: 11 / 20

6
Section 3
Operation
This section describes how to set up and use the HTT-1S.
Setting up the HTT-1S
As shipped from the factory, the HTT-1S container contains the following
items:
•
The HTT-1S Function Tester
•
This manual
•
Return cable
•
Output cable
Remove the HTT-1S from the container and place it on a non-conductive
test bench. Plug the cables; follow instructions on Set up procedure. To begin
testing, follow the directions in Section 1 above.
Note: This setup will work for any hipot / ground bond tester having a standard
wall receptacle and return banana jack connectors.