Complete Control MRZ-260 - AUTRE, Руководство по установке, Страница: 10 / 20

MRZ-260 B
ASE
S
TATION
Page 7
Front Blaster Overload
A few models of audio/video components can be overloaded by the
Front Blaster. If you are having intermittent or inconsistent results
with a particular component, try repositioning the MRZ-260 and
facing the Front Blaster in a different direction. If this improves the
situation but is impractical, it may be necessary to utilize the self-
adhesive flashers only and follow the steps below to Disable the
Front Blaster. This will limit the number of components your MRZ-
260 can control to four. If you have more than four components
you can purchase an additional MRZ-260.
Enabling/Disabling the Front Blaster - Step by
Step via PC
Open the PC software, then plug the MX-880Z PC programmable
remote control into the PC. Open your saved configuration and fol-
low these steps to turn off the front blaster:
1. Open the RF Control Window
The RF Control window opens after selecting RF Control.
2. Turn on/off the Front Blaster
Click on the cell in the IR LED OUTPUT/IR BLASTER column. A list
box will appear. Select a PORT for your device or choose Blaster 1
to enable the front blaster.
3.
Next, click on Save to apply your change.