Compleo A01AE11001.11, Руководство по эксплуатации

Страница: 40 / 114

40 A01Axxxxxx.xx | 04 2022-11
4. Route the supply line up to the terminal block, cut to
length and strip the sheath to a length of approx.
70 mm.
5. The individual wires must be stripped 18 mm.
6. Connect all conductors of the supply line to the
external wiring side according to the adjacent
illustration.

The conductor cross-section must be selected
taking into account the maximum charging
capacity and the length and type of routing of the
power supply cable.

Conductor cross-section, rigid: max. 10 mm²

Conductor cross-section, flexible: max. 6 mm²
(with and without ferrule)
7. Connect all conductors of the supply line to the
external wiring side according to the figure opposite.
8. Ensure that the individual wires are connected
correctly and the clamping screws (4 x 16 mm) are
tightened firmly (M = 1.5 - 1.8 Nm).
Fig. 18: Terminal block assignment
1- or 2-phase connection
Depending on the local grid structure, the compleo solo charging system can also be operated with 1
or 2 phases. The maximum charging power is reduced analogously to the number of connected phases.
11 kW system 22 kW system
1 phase Phase L1 ->
Terminal
L1
=>
Max. charging
power:
approx. 3.6 kW approx. 7.2 kW
2 phase
Phase L1 ->
Terminal
L1
Max. charging
power:
approx. 7.2 kW approx. 14.4 kW
Phase L2 ->
Terminal
L2
PE
L1
L2
L3
N