Compleo A01AE11001.11, Руководство по эксплуатации

Страница: 38 / 114

38 A01Axxxxxx.xx | 04 2022-11
Installation material and tools
• Drill
• Masonry drill Ø 8 mm
• 5 wood screws (6 x 60, V2A) (accessory kit)
• 5 large diameter washers (DIN 9021 10.5 mm, V2A) (accessory kit)
• Wrench WAF 10
• TORX-TR15 bit
• TORX-TR20 bit
• Torque wrench
Carrying out installation
1. Place the connection box on the wall at the
selected position and align it using the
integrated spirit level.
2. Mark the boreholes (1 - 5).
3. Drill boreholes with a depth of Ø 8 mm and
60 mm.
4. Insert Ø 8 mm hole plug.
5. Mount the connection box on the wall with
screws and large diameter washers.
Observe the corresponding tightening
torques.
6. Depending on the cable routing from
above or below, break out and deburr the
pre-punched bushings in the connection
box accordingly.
Fig. 16: Boreholes
1
5
4
3
2