Compex NetPassage 16A, Руководство пользователя, Страница: 66 / 105

Chapter 3 Configuring Compex NetPassage 16A
57
3.8.1 Implementing Parallel Broadband
To implement Parallel Broadband, you need to install two or more units of
Compex NetPassage 16A in the network, each connected to its broadband
Internet service account. There is no restriction on the type of broadband
Internet accounts that they are connected to. For example, if you have two
Compex NetPassage 16As in the network, you may have one connected to
Cable Internet whereas the other connected to ADSL line. Once the Parallel
Broadband is implemented, these two Compex NetPassage 16As will balance
the Internet traffic among them while functioning as Fail-Over Redundancy to
each other.
To activate Parallel Broadband
1. Click on the
Parallel Broadband
from the Command Menu and the
Parallel Broadband activation page will be displayed as shown.
Figure 3.8b Activating Parallel Broadband
2. Check the
Enable
radio button and press the
Apply
button.
NOTE
You DO NOT need to implement Parallel Broadband for Internet sharing
using one unit of Compex NetPassage 16A.