Compex NetPassage 16A, Руководство пользователя, Страница: 28 / 105

Chapter 2 Getting Started
19
2.4.3 RS232 Serial Command Console
Apart from TELNET session, you may also connect to Compex NetPassage
16A’s Command Console via direct serial connection using the RS232
crossover cable (also known as null modem cable). This section assumes that
Hyper Terminal has been installed properly.
Direct Serial Connection to Compex NetPassage 16A’s Command
Console
1. Connect the RS232 serial port of Compex NetPassage 16A to the serial
COM port of a computer using the RS232 crossover cable.
2. Power on Compex NetPassage 16A and launch the Hyper Terminal, as
shown in Figure 2.4d.
3. Select the connection type from the drop down menu. For example, if the
RS232 crossover cable is connected to the COM1 of your computer, select
Direct to Com 1 , as shown in Figure 2.4e. Press the OK button to
proceed.
Figure 2.4d Launching Hyper Terminal Figure 2.4e Selecting Communication
Port