Comper IR-FT Скачать руководство пользователя страница 10

10/2

1

 

High temperature 

warning 

In  body  temperature  mode,  if  the  measured  temperature  is 
higher than 43.0℃ (109.4℉) 

Error prompt 

Err 

When the ambient temperature range is beyond 10℃~40℃ 
(50℉-104℉) 

ErrH 

Hardware fault 

ErrE 

Storage hardware fault 

7. Contraindications, precautions, warnings and prompts

1) Contraindications

Currently none 

2) Precautions

-

The  product  is  an  infrared  forehead  thermometer  for  professional  measurement  of  body

temperature. The measured temperature will vary depending on the skin of human body.

-

When the measured object and the forehead thermometer are not in the same environment,

place the infrared forehead thermometer in the same environment with the measured object

for 30 min prior to use.

-

The environment around the measured object should be stable. Do not make measurement

at places with large airflow such as air outlet of fan and air conditioner, etc.

-

Do not use the device outdoors or under strong sunlight.

-

Do not hold the front end of thermometer while measuring.

-

The measurement site cannot be covered by hair. In case of any sweat stain, wipe clean with

a dry towel before measuring. Otherwise, it will affect the measurement result.

-

The measurement result will be lower after taking cooling measures such as cold compress

and sweating on the forehead of patients with fever. Therefore, do not make measurement

in such cases.

-

There is no standard value specified for body temperature. Please consult a doctor to see if

you are in fever.

-

The device is MR unsafe.

3) Warnings

It is very dangerous to make self-judgment on the measurement result or carry out treatment. Please 

follow the doctor's instructions. 

Self-judgment may lead to illness exacerbation.

Medical care is needed in case of excessive body temperature or high body temperature for a long 

time, especially for infants. Please consult the doctor promptly. 

Содержание IR-FT






















Отзывы: