Hyundai Sonata 2011-up CN-M5
Installation manual
Caution
– Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If
unsure of expertise required, please consult a qualified installation tech.
56
The 2012+ Sonata requires a replacement
ribbon cable to be installed into the radio.
This is supplied in the kit. The locking tab
for the ribbon cable is located facing out
from the radio. With a small flat screw
driver, lift up gently the locking tab, at this
point the flat ribbon can be pulled to the
inside of the radio and successfully
removed.
Note – Silver contacts face down on this
type of connector.
Locking tab in lifted position. Do not
detach the flat ribbon from the factory
face plate because it will not be reused.
