background image

About This Guide   vii

Compaq Confidential – Need to Know Required

Writer:

 Bob Young  

Project:

 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Drive Upgrade Procedure  

Comments:

 

Part Number:

 127511-002  

File Name: 

a-frnt.doc  

Last Saved On: 

7/13/00 9:44 AM

Any surface or area of the equipment marked with these symbols

indicates the presence of a hot surface or hot component. If this

surface is contacted, the potential for injury exists.

WARNING:

  To reduce the risk of injury from a hot component, allow

the surface to cool before touching.

Power Supplies or Systems marked with these symbols

indicate the equipment is supplied by multiple sources of

power.

WARNING:

  To reduce the risk of injury from electrical shock,

remove all power cords to completely disconnect power from

the system.

Any product or assembly marked with these symbols indicates that

the component exceeds the recommended weight for one individual

to handle safely.

WARNING:

  To reduce the risk of personal injury or damage to the

equipment, observe local occupational health and safety

requirements and guidelines for manual material handling.

Getting Help

If you have a problem and have exhausted the information in this guide, you
can get further information and other help in the following locations.

Compaq Technical Support

You are entitled to free hardware technical telephone support for your product
for as long you own the product. A technical support specialist will help you
diagnose the problem or guide you to the next step in the warranty process.

Содержание STORAGEWORKS TL881



















Отзывы: