Compaq SDLT 110 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 63

Compaq SDLT 110 Скачать руководство пользователя страница 10

About this Guide

x

StorageWorks SDLT Tape Drive by Compaq Reference Guide

This symbol indicates the presence of electric shock hazards. The area
contains no user or field serviceable parts. Do not open for any reason.

WARNING: To reduce the risk of injury from electric shock hazards, do not open
this enclosure.

This symbol on an RJ-45 receptacle indicates a Network Interface Connection.

WARNING: To reduce the risk of electric shock, fire, or damage to the
equipment, do not plug telephone or telecommunications connectors into this
receptacle.

This symbol indicates the presence of a hot surface or hot component. If this
surface is contacted, the potential for injury exists.

WARNING: To reduce the risk of injury from a hot component, allow the surface
to cool before touching.

These symbols on power supplies or systems indicate the
equipment is supplied by multiple sources of power.

WARNING: To reduce the risk of injury from electric shock, remove
all power cords to completely disconnect power from the system.

This symbol indicates that the component exceeds the recommended
weight for one individual to handle safely.

WARNING: To reduce the risk of personal injury or damage to the
equipment, observe local occupational health and safety requirements and
guidelines for manual material handling.

Important Safety Information

Before installing this product, read the

Important Safety Information

document

provided.

«
...
8
9
10
11
12
...
»

Содержание SDLT 110
































































Отзывы:

Нет отзывов