Configuring the GbE Interconnect Switch Using the Web-Based Management Interface
4-4
Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide
COMPAQ CONFIDENTIAL
Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 10:02 AM
To create a new user account:
1. Click the small square to the left of the
Management
folder on the main menu. The
Management menus are displayed.
2. Click
User Accounts.
The following window is displayed.
3. Click
Add
to add a new user to the table. The following window is displayed.
4. Type the user name in the
User Name
field.
5. Type the user’s password in the
New Password
field.
6. Type the new password a second time in the
Confirm Password
field.
7. Click the drop-down arrow in the
Access Right
field to select the access level. The three
access levels are
User, User+,
and
Root.
A
Root
user has full read/write access, while a
User
has read-only access. A
User+
has the same privileges as a
User,
but with the
added ability to restart the GbE Interconnect Switch.
NOTE:
Refer to Table 2-1 in Chapter 2 for an explanation of access rights.
8. Click
Apply.
The
Enter Network Password
dialog box is displayed.
9. Type the new user’s name in the
User Name
field.
10. Type the user’s password in the
Password
field.
11. Click
OK.
The
User Account Management
window is displayed with the new user
listed. You are now ready to configure the GbE Interconnect Switch.
NOTE:
To save the configuration settings permanently, you must enter them into non-volatile RAM
(NVRAM) using the
Save Changes
option on the
Maintenance
menu. Refer to the “Saving
Changes” section in this chapter.
