Compaq Presario SG3300 - Desktop PC, Руководство по началу работы

Страница: 126 / 166

118
Getting Started (features vary by model)
To connect the drive:
1 Turn on the computer.
2 Plug the rectangular end of the USB 2.0 cable ( E ) into an available USB port on the
computer. Plug the square end of the USB 2.0 cable ( F ) into the USB connector on the
back of the HP Media Drive.
3 Install the software and drivers. Refer to the HP Media Drive documentation for more
information.
Locating the Drive and Assigning a Drive Letter
When you plug the drive into an USB 2.0 connector or insert it into an HP Media Drive
bay, the operating system automatically assigns a letter to the hard disk drive. The
assigned letter depends on other storage devices connected to the computer.
To locate the drive:
1 Click the Windows Start Button on the taskbar.
2 Click Computer .
3 Select the drive under Hard Disk Drives or Devices with Removable Storage. The
default volume name of this drive is
HP Personal Media Drive or HP Pocket
Media Drive .
You can rename the drive in the Computer window by right-clicking the drive, selecting
Rename , and then typing in a new name. HP recommends renaming a drive if you have
more than one external hard disk drive.
You can permanently assign a drive letter to avoid the letter changing when you connect
and disconnect this drive and other devices. Also, it is easier for a software program to
locate the files on the HP Media Drive if a drive letter is assigned. Some programs may not
be able to find files if the drive has a new drive letter.
NOTE: USB 2.0 uses only one USB connector. USB 1. x systems use both USB
connectors.