PowerStorm 300/PCI Hardware Overview
2–2 PowerStorm 300 Graphics Options Windows NT and Hardware Installation
Table 2-2 provides a matrix of support information for the PowerStorm 300/PCI graphics
option.
Table 2-2 Compaq PowerStorm 300/PCI Support Matrix
System
Service Pack
Minimum BIOS O/S Version
DIGITAL Personal Workstation
500a (enhanced)
Service Pack3
or later
V5.65
Windows NT 4.0
DIGITAL Personal Workstation
600a (enhanced)
Service Pack3
or later
V5.65
Windows NT 4.0
Compaq Professional
Workstation XP1000
Service Pack3
or later
V5.68
Windows NT 4.0
The PowerStorm 300/PCI graphics option (see Figure 2-1) contains one standard 15-pin
VGA connector on the PCI bulkhead.
The option module contains one 3-pin jumper for enabling or disabling the VGA capability
when more than one VGA graphics module is installed in the same system.
Figure 2-1 PowerStorm 300/PCI Graphics Controller Option
➊
Standard 15-pin VGA connector
➌
VGA enabled (default)
➋
VGA enable/disable jumper
➍
VGA disabled
