1-4
English
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 06/15/98 5:31 PM
Pages: 23 Words: 4300 Template: c:\msoffice\templates\working\comm.dot
File Name Bk1ap_en.doc Part Number 307809-001
2.
Connect the monitor signal cable to the 15-pin connector
1
on the rear panel of the computer. Tighten the screws on
the end of the connector.
IMPORTANT:
Be sure the signal cable aligns with the 15-pin
connector. Do not force the cable onto the connector or you may
damage the signal cable.
3.
Connect the monitor power cord
2
underneath the back
panel of the monitor, then plug the other end of the cord
into an electrical outlet that is easily accessible and close to
the monitor.
!
WARNING:
To reduce the risk of electrical shock or damage
to your equipment, do not disable the power cord grounding
feature. This equipment is designed to be connected to a
grounded (earthed) power outlet that is easily accessible to
the operator. The grounding plug is an important safety
feature.
CAUTION:
Be sure that the power outlet you plug your power
cord into is easily accessible and located as close to the
equipment operator as possible. When you need to
disconnect power to the equipment, be sure to unplug the
power cord from the power outlet
.
