Compaq Evo D500 USD, Руководство по началу работы

Страница: 8 / 28

4 Quick Setup & Getting Started Guide
Quick Setup
Step 3: Connect External Devices
Connect the monitor, mouse, and keyboard cables. If you use a
network, connect the network cable to the Ethernet RJ-45 Connector.
For the location of connectors on the rear panel, refer to “Step 2:
Identify Rear Panel Components” on page 3. For easy setup, Compaq
has color-coded the cables and rear panel connectors.
Å
WARNING: To reduce the risk of electrical shock, fire, or damage to the
equipment, do not plug telecommunications/telephone connections into
the network interface controller (NIC) connectors.
PS/2 mouse and keyboard connectors are available only on Evo D500
Ultra-Slim Desktop personal computers equipped with the Legacy
Module. A USB mouse or keyboard may be connected to
any of the
available USB connectors.
Ä
CAUTION: Do not add additional, optional hardware devices to your
personal computer until the operating system is successfully installed.
Doing so may cause errors and may prevent the operating system from
installing properly.
sp-gs.book Page 4 Thursday, December 13, 2001 8:58 AM