Installation
2–4 ELSA GLoria Synergy Graphics Controller Installation Guide
indicating that the default screen resolution and refresh rate are being used. For
information on changing these values, refer to Section 2.3.3.
2.3.3
Changing Windows NT Display Characteristics
After installing the ELSA GLoria Synergy Graphics Controller, you can change the screen
resolution and refresh rate, collectively referred to as the display mode. Before changing
the display mode, you should verify that your monitor can accept the new values (refer to
the monitor documentation). To change the display resolution and refresh rate, perform the
following steps:
1.
From the desktop, choose My Computer.
2.
From My Computer, choose Control Panel.
3.
From Control Panel, choose Display.
4.
From the Display Properties dialog box, choose the Settings tab.
5.
From the Settings dialog box, click on the arrows in the Desktop Area to change the
screen resolution.
To change the refresh rate, choose one of the options in Refresh Frequency. (You can
also change the resolution and refresh rate by choosing List All Modes and the
desired mode, and then choosing OK.) If the refresh rate selected is not supported by
the resolution you chose, the resolution will automatically change to the nearest value
supported by that refresh rate, or the refresh rate will change to support the resolution.
6.
Choose Test to verify that the settings work correctly. A test pattern will be displayed
on your monitor for about five seconds.
7.
You will now see the question “Did you see the test bitmap properly?”. If you are
satisfied with the video display, choose Yes.
Choose OK to accept the changed settings.
8.
You may have to adjust your monitor to align the new resolution to the monitor. This
is typically done by using the controls on the front or side of the monitor.
2.4
Hardware Installation
The following section describes how to install the ELSA GLoria Synergy Graphics
Controller. To install the graphics option, perform the following steps:
__________________________ Note ____________________________
Before installing the graphics option, check your monitor specification for signal
compatibility and supported features offered by the graphics option.
___________________________________________________________
