Compaq Deskpro 4000N - Desktop PC, Руководство по обслуживанию и ремонту

Страница: 23 / 174

Compaq Deskpro 4000S and 4000N Personal Computers 2-1
chapter
2
C
ONFIGURATION AND
D
IAGNOSTIC
U
TILITIES
This chapter contains descriptions of Compaq utilities that can be helpful when servicing the
Compaq Deskpro 4000S and 4000N Personal Computers. These utilities include:
■
Configuration and Diagnostics
■
ROMPaq
■
Compaq Intelligent Manageability
■
Compaq Insight Manager
■
NT Support Software Diskette
See Appendixes D, E, and F for error codes, error messages, and other troubleshooting techniques.
The Configuration and Diagnostics utilities are located on a hard disk partition on the computer.
These utilities include Create a Diagnostics Diskette, Setup, TEST, and INSPECT.
You can run Configuration and Diagnostics from diskette, or use the Support Software CD to install
a system partition containing Configuration and Diagnostics utilities.
Use the Compaq Configuration and Diagnostics utilities in the following instances:
■
When a system configuration error is detected during the Power-On Self-Test (POST).
■
To change factory default settings for some of the computer features.
■
To change the system configuration, which is sometimes necessary when you add or remove
optional hardware.
■
To set system configuration features.
2.1 Getting Ready
2.1.1 Preparing the Computer
If you encounter an error condition, complete the following steps before starting problem isolation
procedures:
1. Ensure proper ventilation. The computer should have a 3-inch (7.6-cm) clearance at the back of
the system unit.
2. Turn off the computer and peripheral devices.