About This Guide ix
Compaq Confidential – Need to Know Required
Writer:
Debbie McRill
Project:
DAT Tape Drive Reference Guide
Comments:
new notice page & revised symbols on
equipment section
Part Number:
155452-002
File Name:
front.doc
Last Saved On:
2/18/00 5:43 PM
Any surface or area of the equipment marked with these
symbols indicates the presence of a hot surface or hot
component. If this surface is contacted, the potential for
injury exists.
WARNING:
To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
Power Supplies or Systems marked with these
symbols indicate the equipment is supplied by
multiple sources of power.
WARNING:
To reduce the risk of injury from
electrical shock, remove all power cords to
completely disconnect power from the system.
Rack Stability
WARNING:
To reduce the risk of personal injury or damage to the
equipment, be sure that:
■
The leveling jacks are extended to the floor.
■
The full weight of the rack rests on the leveling jacks.
■
The stabilizing feet are attached to the rack if it is a single
rack installations.
■
The racks are coupled together in multiple rack installations.
■
A rack may become unstable if more than one component is
extended for any reason. Extend only one component at a
time.
Getting Help
If you have a problem and have exhausted the information in this guide, you
can get further information and other help in the following locations.
