8
Choose Your Menu Style
7. Select a category of menu styles from the
Category
drop-down list.
8. Scroll through the list, click the style to use for
your menus, and click the
Next
button.
Set Recording Parameters
9. Select your record settings from
Record
drop-
down list.
10. Select the quality for your recordings from the
Set Quality
drop-down list. Refer to the table
below for more information on video quality
settings and record time.
Make the Recording
You can use the VCR playback control buttons to
locate the video you want to record on the DVD.
11. Click the
Record
button to begin recording.
12. Click the
Stop
button to finish recording. A
message displays on the screen to indicate the
process is complete.
You can fit this amount of video on the disc...
If you select a video
DVD (4.7 GB)
CD (700 MB)
CD (650 MB)
quality setting of…
Best
60 minutes
9 minutes
8 minutes
Better
120 minutes
18 minutes
16 minutes
Good
180 minutes
27 minutes
24 minutes
Scroll to
desired
style
Note:
A typical Direct-to-DVD project using a 60 minute tape will take 60 minutes to capture and an additional 60 minutes to
author to DVD. Project times may vary if you perform editing.
Click to
select style
Rewind
Play
Stop
Fast
forward
Move
back one
frame
Move
forward
one
frame
Choose what you
want to record
Choose
the video
quality
Add
chapter
points
automati-
cally
Select to
give menu
buttons
and text a
3-D effect
My Movie Final.p65
2/6/2002, 7:20 PM
8