Compaq Compaq 486 Скачать руководство пользователя страница 79

Страница: 79 / 88

Remove the keyboard (Section 5.5).

Remove the front bezel (Section 5.14).

Remove the display assembly (Section 5.14).

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

WARNING

The display inverter board contains high voltage.

Avoid contact with all

surfaces of the board.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

CAUTION

When removing or inserting cables with ZIF connectors, do not pull, twist, or
apply tension to cables.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

NOTE: The ZIF connectors in this product have mechanical latches that either
slide forward and lift up or slide up to open.

Be sure the latches on the

ZIF connectors are opened before attempting to remove the cable.

Carefully disconnect the power distribution board cable from the ZIF
connector on the display inverter board (Figure 5-23).

Carefully disconnect two cables from the display assembly (Figure 5-23).

Содержание Compaq 486

























































































Результаты поиска

Содержание Compaq 486

Отзывы:

Бренды по названию

Популярные бренды

Compaq Compaq 486, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание Compaq 486

Отзывы:

Бренды по названию

Популярные бренды