Compaq Deskpro Workstation AP250 Hardware Reference Guide
2-21
Compaq Confidential - Need to Know Required
Writer:
Beth Zanca
Part Number:
191009-001
File Name:
e-ch02.doc
Last Saved On:
04/12/00 1:35 PM
Last Saved By:
Lydia Sanchez
Installing a Processor
The Compaq Deskpro Workstation AP250 is a one-processor system.
To upgrade your existing processor to a faster speed processor, refer to
the instructions provided in the following sections.
Attaching the Heatsink to the Processor
!
WARNING:
To reduce the risk of personal injury from hot surfaces,
allow the internal system components to cool before touching them.
CAUTION:
Static electricity can damage the electronic components
of the workstation. Before beginning these procedures, be sure you
are discharged of static electricity by briefly touching a grounded
metal object.
To attach the heatsink to the processor:
1.
Turn off the workstation and disconnect the power cord from the
grounded AC outlet and the back of the workstation.
2.
Remove the workstation access panel. Refer to Removing the
Workstation Access Panel in this chapter.
