Compaq AlphaServer G160, Руководство пользователя

Страница: 75 / 234

ConsoleWorks 3-33
1. In the left navigation panel select Operations. From the selection links
select Consoles. The Show Consoles screen opens.
NOTE: The maximum number of consoles that can exist on an SMC is set
by the ConsoleWorks license. If the Show Consoles screen lists the
maximum number of consoles (not including the ConsoleWorks
internal console, CONWRKS), do not attempt to add another.
Instead, you must delete a console before adding one or add a
license for more consoles. (See Appendix D for license information.)
2. At the top of the Show Consoles screen select Add Console. The Add Console
screen opens.
3. From the Type dropdown menu select Telnet. Click the Add Console button.
The Add Telnet Console screen opens (Figure 3–19).
4. Enter the information requested for the console:
a. Enter a name and a description for the console. The console name must
be unique. (Table 1–2 lists the names given to consoles at installation.)
b. Enter an alias. See Section 3.3.5 for information about console aliases.
c. Select Yes in the Logged list box. In the block to the right of the list box
enter D:\Cwks\Log.
d. Enter the IP host number in the block. (This is the IP address of the
GS80/160/320 system’s terminal server.) See Table 1–3 for the IP host
number for each system.
e. In the IP port block enter a number between 2001 and 2008; the last
digit is the terminal server port to which the console is attached. This
number must be unique for each console in a system. See Table 1–2.
f. Do not select the Raw Data checkbox.
Continued on page 3-35