Compaq 7RPK11 7000T, Руководство по техническому обслуживанию и ремонту

Страница: 259 / 278

The system is trying to start
from the hard drive but the hard
disk is damaged.
Insert a bootable disk into the
disk drive and restart the
computer with Ctrl+Alt+Del.
Disk boot is disabled in
Computer Setup.
Run Computer Setup and enable
disk drives.
Hard drive operation seems
slow, or hard drive activity
light is not on, or stays on
without blinking.
The hard disk files may be
fragmented.
From the desktop click on the
Start menu, Programs,
Accessories, System Tools, and
check for problems. If problems
exist, checkmark the
"Automatically fix errors" box at
the bottom to correct the
problems. If a large enough
allocation unit is found, click on
the Start button and choose
Programs, Accessories, System
Tools, Disk Defragmenter.
Return to top
Hardware Installation
Problem Probable Cause(s) Possible Solutions
A new device is not
recognized as part of the
computer system.
When the system advised you of
changes to the configuration,
you did not save the changes.
Reboot the computer and follow
the instructions for saving
changes.
The system may not have
automatically recognized the
new device.
Run Computer Setup and identify
the device.
The cables for the new external
device are loose, or the power
cables are unplugged.
Check all cables.
The power switch for the new
external device is not turned on.
Turn off the computer, turn on
the external device, and then
turn on the computer to integrate
the new modes of the computer.
Return to top
Power
Problem Possible Solution