Compaq 7RPK11 7000T, Руководство по техническому обслуживанию и ремонту

Страница: 258 / 278

DVD disc is not properly seated
in the drive.
Turn off the computer, insert a
straight pin into the emergency
eject hole, then push firmly.
Slowly pull the tray out from the
drive until fully extended, then
remove the DVD disc.
DVD drive devices are not
detected.
DVD drive is not connected
properly.
Open the computer and check to
see that the cable is connected
properly.
Incorrect driver is installed. Ensure the correct driver is
installed in computer.
Drive has been changed. Make sure the jumper setting is
set for "Setup."
Proper drivers are not loaded. Restart the system and make
sure the DVD drivers are loaded.
Return to top
Hard Drive
Problem Probable Cause(s) Possible Solution
Hard drive error occurs. Hard disk has bad sectors or has
failed.
Run Computer Setup. Reformat
the hard disk.
Drive not found. Cable could be loose. Check cable connections.
Disk transaction problem. Either the directory structure is
bad or there is a problem with a
file.
From the desktop click on the
Start menu, Programs,
Accessories, System Tools, and
check for problems. If problems
exist, checkmark the
"Automatically fix errors" box at
the bottom to correct the
problems. If a large enough
allocation unit is found, click on
the Start button and choose
Programs, Accessories, System
Tools, Disk Defragmenter.
Nonsystem disk message. The system is trying to start
from a disk that is not bootable.
Remove the disk from the disk
drive.