Compaq 166207-B21 - Smart Array 5302/32 RAID Controller Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 163

Compaq 166207-B21 - Smart Array 5302/32 RAID Controller Скачать руководство пользователя страница 2

COMPAQ CONFIDENTIAL

Writer: John Turner File Name: a-frnt.doc

Codename: SilverHammer Part Number: 135606-004 Last Saved On: 5/23/02 12:42 PM

© 2002 Compaq Information Technologies Group, L.P.

Compaq, the Compaq logo, Compaq Insight Manager, ProLiant, ROMPaq, SmartStart,
SoftPaq, and StorageWorks are trademarks of Compaq Information Technologies Group, L.P.
in the U.S. and/or other countries. Microsoft, MS-DOS, Windows, and Windows NT are
trademarks of Microsoft Corporation in the U.S. and/or other countries.

All other product names mentioned herein may be trademarks of their respective companies.

Compaq shall not be liable for technical or editorial errors or omissions contained herein. The
information in this document is provided “as is” without warranty of any kind and is subject to
change without notice. The warranties for Compaq products are set forth in the express limited
warranty statements accompanying such products. Nothing herein should be construed as
constituting an additional warranty.

Compaq Smart Array 5300 Controller User Guide

May 2002 (Fourth Edition)
Part Number 135606-004

«
1
2
3
4
...
»

Содержание 166207-B21 - Smart Array 5302/32 RAID Controller




































































































































































Отзывы:

Нет отзывов