manualshive.com logo in svg

Compaq 133756-004 - Deskpro EN - 6550 Model 6400, Справочник по аппаратуре

Поделиться
Скачать
Compaq 133756-004 - Deskpro EN - 6550 Model 6400 Скачать руководство пользователя страница 3

Compaq Confidential - Need to Know Required

Writer:

 Martha Rockecharlie 

Part Number:

 178171-002 

File Name:

 b-NoticeSDT

Last Saved On:

 07/11/00 6:25 PM 

Last Saved By:

 Martha Rockecharlie

Notice

Compaq Computer Corporation shall not be liable for technical or editorial
errors or omissions contained herein. The information in this guide is subject
to change without notice.

© 2000 Compaq Computer Corporation. Except for use in connection with the accompanying
Compaq product, no part of this guide may be photocopied or reproduced in any form without
prior written consent from Compaq Computer Corporation.

COMPAQ, the Compaq logo, and Deskpro Registered in U.S. Patent and Trademark Office.

Microsoft, Windows, Windows NT, and other names of Microsoft products referenced herein
are trademarks or registered trademarks of Microsoft Corporation.

Intel and Pentium are registered trademarks of Intel Corporation. Celeron and MMX are
trademarks of Intel Corporation.

All other product names mentioned herein may be trademarks or registered trademarks of their
respective companies. Printed in U.S.A.

The following words and symbols mark special messages throughout this guide:

WARNING: 

Text set off in this manner indicates that failure

to follow directions could result in bodily harm or loss of life.

  

CAUTION:  

Text set off in this manner indicates that failure

to follow directions could result in damage to equipment or
loss of information.

Hardware Reference Guide

Compaq Deskpro EN Series of Personal Computers
Slim Desktop Models

First Edition (October 2000)
Part Number 178171-002

Compaq Computer Corporation

Содержание 133756-004 - Deskpro EN - 6550 Model 6400

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды