manualshive.com logo in svg

Compaq 133756-004 - Deskpro EN - 6550 Model 6400, Справочник по аппаратуре

Поделиться
Скачать
Compaq 133756-004 - Deskpro EN - 6550 Model 6400 Скачать руководство пользователя страница 19

Hardware Reference Guide    

2-11

Compaq Confidential - Need to Know Required

Writer:

 Martha Rockecharlie 

Part Number:

 178171-xx2 

File Name:

 e-UpgradesSDT

Last Saved On:

 07/25/00 9:22 AM 

Last Saved By:

 Kristen Cover

Installing a Diskette, CD-ROM, DVD-ROM, or Tape Drive

1.  If you have locked the Smart Cover Lock, use Computer Setup to

unlock the lock and disable the Smart Cover Sensor.

2.  Shut down the operating system properly, turn off the computer

and any external devices, disconnect the power cord from the
power outlet, and remove the computer cover.

3.  Remove the bezel blank from the front bezel.

4.  If you are installing a diskette drive, rotate the drive cage to the

upright position.

5.  Install two guide screws on each side of the drive.

Some options use M3 metric thread hardware. Extra guide
screws are provided on the bottom of the chassis, next to the
power supply. The Compaq-supplied metric screws are black.

6.  Install the drive in the desired drive bay by sliding it into the slots

 and toward the front of the computer 

.

Be sure the guide screws line up with the guide slots in the
drive cage.

Installing an Optional Drive (may vary)

Содержание 133756-004 - Deskpro EN - 6550 Model 6400

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды