![background image](http://html1.mh-extra.com/html/companion/inpen/inpen_instructions-for-use-manual_2644761042.webp)
42
3. Pull off the Outer Cap and the Inner Cap.
•
Discard the Outer Cap.
•
Keep the Inner Cap to remove the Needle after
your injection.
4. Turn the Dose Knob to select amount to prime:
•
Dial 2 units as shown.
5. Hold the InPen™ so the needle is pointing up and
tap the cartridge to collect any air at the top.
6. Prime the InPen™ by pushing the Injection Button
with your thumb and holding for eight (8) seconds. You
should see a few drops of insulin.
7. If no stream is seen, repeat priming according to
steps 4 through 6. A new Cartridge may need to be
primed several times.
CAUTION: If no insulin flows after several
attempts, attach a new Needle, as the one on
your InPen™ may be clogged.
Содержание InPen
Страница 1: ...1 InPen System Instructions for Use...