COMPANION InPen, Инструкция по эксплуатации

Страница: 41 / 57

41
•
The numbers on the Cartridge Holder give
an estimate of the amount of insulin remaining
in the Cartridge. Do not use these numbers for
measuring an insulin dose.
•
For more information on InPen™ and insulin,
please refer to the Patient Information provided
with your Insulin Cartridge or contact your
healthcare provider.
Frequently Asked Questions about
Preparing your InPen
™
1. What should I do if I can’t attach the Cartridge
Holder to the InPen™ body?
Check that the Insulin Cartridge is fully inserted into
the Cartridge Holder and the Screw is screwed all the
way back inside the InPen™. Then carefully line up
the Cartridge Holder with the InPen Body and screw
together until secure.
2. Why do I pull the InPen™ apart when I try to remove
the InPen™ cap?
Twisting the InPen™ Cap may have unscrewed the
Cartridge Holder.
•
Remove the cartridge holder and Insulin
cartridge from the InPen™ cap.
•
Place the Insulin cartridge into the Cartridge
Holder and screw it back onto the InPen™
assembly.
•
Be sure to prime the InPen™ again before the
next use.
12. Prime your InPen
™
CAUTION: If you do NOT prime, you may receive too
much or too little insulin. Prime your InPen™ before
every injection.
1. Remove Paper Tab from the Needle
2. Attach the Needle by screwing the Needle straight
onto the Cartridge Holder as shown.